Quote:
Originally Posted by Richard L
Just to recap:
1. test the 6mm line with "SYS" on, make sure there is plenty of liquid shooting out with the FAV disconnected
2. Reinstate the 6mm line to the FAV and apply 12V to the coil manually with the "SYS" on. If there is no fluid coming out of the FAV, it is damaged.
3. Send it to me for repair.
|
good news Richard,
1. flows out quickly
2. again flows well and sprays out the jet.
fingers crossed was just a wee blockage, will keep an eye on it as always, many thanks for all your help again.