Here I am again, this time with questions.
I got couple things to couple the filter, pump and accumulator together. The couplers are aluminum but anodized (Blue ones on the picture below). Does that go along with methanol? Since aluminum gives problems with aluminum, but it is anodized so it should be ok right?
After assembling these 3 things together, it seems to big and it wont fit anywhere in my engine bay so I decided to make a stainless water tank in the boot and mount the pump and accumulator next to it.
Since the distance gets bigger to the nozzles do I need a primer pump? It is for 2 x 75cc/m @ 100 psi nozzles. I think shurflo pump with accumulator can cover this distance, but I want to be sure.
I also get myself a nice pressure gauge with 16bar (232psi) range, it should be more than enough for this system. Gauge is 40mm and it is easy to install somewhere in the dash. I am still going to make a digital custom flow gauge next to this one.
Here my assembly:
Here my pressure gauge:
