View Single Post
  #5  
Old 30-05-2016, 11:28 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS-6 brown wire fail safe question

Quote:
Originally Posted by Team Scream View Post
So you are saying join the black and brown together and solder them to the orange wire (test mode connector +) at the ecu? That seems like a loop will be created. The black is listed as normally closed and the brown is listed as normally open

No and No.

I made a mistake. start aqain,
black wire to ground and white wire to the failsafe pin of your equipment (green connector).

Orange wire is not used

make sure DR0 is set.
__________________
Richard L
aquamist technical support
Reply With Quote