Re: Nozzle size
I have a VQ35DE which is single throttle body. The idea of individual ports is nice but sounds like a pain lol.
Lets say if decided to go ahead with individual port. Would this setup work?
If I decided to up my injection to 20% which would make a total 2400cc needs to be injected.
a 0.7mm flows at 350cc at 120psi.
So if I install 6 x 0.7mm into each cylinder I'm at 2100cc. Then I will install another 0.7mm onto the intercooler outlet. Total of 2450cc.
Does this sound about right?
|