View Single Post
  #3  
Old 27-02-2015, 05:14 PM
Brumbrum Brumbrum is offline
Junior Member
 
Join Date: Feb 2015
Location: Cardiff
Posts: 2
Default Re: Mini Cooper S. What is best nozzle,threshold,etc

I have things working now. I had to do the 1.5 solder link on the back of the controller curcuit board as the 550cc duty cycle was at a45% reduction compared to if i was using 380cc injectors. I have also swapped to 0.5mm jet nozzle and now see a good 10 degrees C reduction on air intake temps as shown by my OBD monitor.
Reply With Quote