Thread: How to verify that the system is opening properly
View Single Post
  #6  
Old 23-04-2017, 06:45 PM
gbmwpower gbmwpower is offline
Junior Member
  
Join Date: Nov 2016
Location: Elverson
Posts: 4
Default Re: How to verify that the system is opening properly
Just drove it again, seems to be working correctly. I did have a sharp angle on one of one of the hoses. It starts to activate around 4-4.5k rpm I did not notice any flickering of the B this time. I will keep an eye on it.

Could you tell me the best way to determine the optimal trigger rpm? I believe it is controlled by injector pulse.

Thanks
Reply With Quote