View Single Post
  #6  
Old 09-07-2019, 05:56 PM
BMC123 BMC123 is offline
Junior Member
 
Join Date: Sep 2016
Location: canada
Posts: 8
Default Re: Need help setting up Aquamist to run based on boost alone

Just in case anyone else is ever interested in basing their set up off boost alone, the following should help. It appears the way to set the system up to trigger at 10 and be maxed at 15 psi is to jumper link MPS, dial the P-I/R trimmer fully counterclockwise and then adjust THRES till trigger is at 10psi and GAIN, till full flow is at 15psi.
Reply With Quote