Thread: Controling individual cylinder WI with PWM
View Single Post
  #4  
Old 15-08-2014, 06:59 AM
Alfa-Vector Alfa-Vector is offline
Junior Member
  
Join Date: Aug 2014
Location: Australia
Posts: 3
Default Re: Controling individual cylinder WI with PWM
Oh...I forgot to mention that this is a NA motor....and based of my injector calculations, if I was to go down the individual cylinder path, each nozzle would have to flow just over 26cc/min at 10% mixture strength or 40cc/min at 15% mixture strength
Reply With Quote