View Single Post
  #29  
Old 14-04-2018, 10:13 PM
turboguy turboguy is offline
Junior Member
 
Join Date: Mar 2018
Location: usa
Posts: 15
Default Re: Control board not commanding FAV to open .

Quote:
Originally Posted by Richard L View Post
I would like you to take the in-tank filter out and examine the cleanliness. If the in-tank filter is as bad as the FAV disc filter, I would expect this is where your problem was.
Replaced it with a brand new one when I installed the new tanks, then went through flushing/purging the system with 100% methanol from torco, hooked everything back up, saw flow on the sensor for a split second when I jumped SYS but nothing ever came out of the other side of the FAV. When I would unhook the 6mm side hose of the fav there would be spray from the backed up pressure since it was unable to flow through the FAV
Reply With Quote