Thread: Mazdaspeed 3
View Single Post
  #67  
Old 31-07-2017, 07:45 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,886
Default Re: Mazdaspeed 3

It is completely up to make the output signal to suit your application.
The "CLP" is just a 4.7V zener diode clamp on the 8V (with 270ohm series resistor). No need to repeat. The low signal is always 0V
__________________
Richard L
aquamist technical support
Reply With Quote