Thread
:
Jaguar S-type install
View Single Post
#
4
15-09-2004, 09:31 PM
Forum Admin
Senior Member
Join Date: Oct 2003
Posts: 127
The next step is to splice in the Fuel's injector's drive wires. As the system used here is 2d based, we need to monitor the PWM signal of the fuel injector. Red wire from the FIA2 goes to the Switched +12v and the Green wire goes to one of the fuel injector's negative switch wire.
__________________
Forumadmin
Forumadmin@waterinjection.info
Forum Admin
View Public Profile
Send a private message to Forum Admin
Visit Forum Admin's homepage!
Find all posts by Forum Admin