Richard -
I would like your feedback to see if I understand this correctly. I have an M62 sc on my 99 Miata. I have no intercooler, fueling is controlled by the Jackson powercard to run at 12.8 - 13.3 under boost. The sc boost is 6.5 psi with the pulley I have.
I use a .4mm nozzle on my 2d system. From the Aquamist site, I calculated that this would cool the air charge by about 80*F.
Mushin, it seems impossible/unlikely that you can get the cooling you need by WI alone! When I used larger nozzles to flow more water, the car balked off the line. And I am running much less boost than you.
Running that amount of boost you would want to inject more water but, Richard, isn't there a point where the amount of water needed would begin to drown out the combustion?
|