Thread: FCM issue
View Single Post
  #7  
Old 26-11-2017, 09:26 PM
Cabotom Cabotom is offline
Junior Member
 
Join Date: Nov 2011
Location: San Diego, CA
Posts: 11
Default Re: FCM issue

Hi Richard,

I went ahead and did as you said and there is no water coming out of the FCM when in TST mode. I also noticed that the green light at the ENGINE BAY connector on the control board is not lighting up, but the TO ECU and TRUNK AREA ONES are green. Thank you in advance for any and all help.

EDIT- Light wasn’t coming on because FCM was open. The TO ENGINE BAY light is on but still no water out of FCM.

Last edited by Cabotom; 27-11-2017 at 12:04 AM.
Reply With Quote