View Single Post
  #5  
Old 20-12-2018, 01:02 AM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Default Re: What does that knob do mister ?

Yes... I was over-thinking the issue and forgot that the W/M injection
signal in my log is the flow meter rate and not an IDC or FAV pulse rate.
The change in fuel injector size is primarily to get the maximum IDC down
to under 85%, and does not mean I will be delivering any more fuel to the
engine. So all I have to do is check that I am getting the same W/M log
rate as before.

As you say, it looks like the x 1.25 jumper will do that without any need
to fiddle with gain control.

Cheers... jondee86
Reply With Quote