[atl93fd]

I didn't get a lot biting on my first post. I'll try again. I have a 1993 RX-7, currently running around 14 lbs of boost. My water injection doesn't kick in until 10 lbs. I believe I'm making about 330-350 rwhp, running 950 cc injectors all around.

I don't notice my intake temps drop when injecting. I also can go 4-5 fill ups conservatively without a noticeable reduction in the amount of water in my resevoir.

I'm running the middle sizednozzle of the 3 coming with the aquamist 2d setup. I'm also running 6bar on the pump itself.

I do have an intercooler and am injecting after the IC, at the intake elbow. My pump is located in the rear hatch, next to the resevoir.

Any input on why I wouldn't notice my intake temps drop or notice the water levels reduce in my resevoir?