Re: Yellow RJ45 Connector & 4 way power connector
You can connect it to any +12v for testing purpose only. Keep the jets away from the engine internals.
It is not advisable to allow the yellow harness to see a +12V source before the fulew injector(+) receive 12V from the battery or ful pump relay.
I would like to have a go looking at the fiagram if oyu can send them to me (richard@aquamist.co.uk)
BTW, you will noit see a 12V on the injector(+) until the ECU i spowered up and ignition key on the pre-crank position.
__________________
Richard L
aquamist technical support
|