Thread: maximum flow for 0.4 mm, 0.5 mm, and 0.6 mm Aquamist nozzles
View Single Post
  #5  
Old 16-02-2004, 09:57 PM
Richard L Richard L is offline
Manufacturer sponsor
  
Join Date: Oct 2003
Location: England
Posts: 4,936
Default
No, 0.5mm jet is fine, roots type supercharge tends to have higher discharge temperature than the centrifugal type, the 0.5mm jet shoudl work well.
__________________
Richard L
aquamist technical support
Reply With Quote