View Single Post
  #9  
Old 01-08-2018, 01:43 PM
Akim2akim2 Akim2akim2 is offline
Junior Member
 
Join Date: Jun 2018
Location: Australia victoria
Posts: 7
Default Re: Aquamist controller failsafe to OE engine map

Hi Richard

Resistance across pins combinations as below with no engine start. And there is no change for any pins when switch is pressed. These switches are like a spring type switch goes back to original position after it is pressed. it is not like an analogue switch.

I have also confirmed all the colour coding of the wires and they are all correct.



T_comeco pin #3 pin#7 7.14 ohms
PDChdcsv pin #3 pin#1 3.62 ohms
FB_PDC pin #3 pin#2 63.1 ohms
T_sport pin #3 pin#6 7.14 ohms
T_dtc pin #3 pin#5 7.14 ohms
Reply With Quote