[parmas]

Thinking back at the configuration of the injection setup :

Trial number 1 100% Water Mixture :

Would be using 4 pumps : two in series and two in parallel.

From experience and studies when injecting water the primary aspect is droplet size. Droplet size works in direct relation to pressure. The more pressure used, the less the droplet size is. Working 2pumps in series would achieve a pressure of 320-400Psi .

Nozzle size is still unknown although positioning two nozzles one pre-turbo and one post turbo could be enough.

Direct port would be ideal for non-balanced plenums as not all cylinders could benefit equally from the setup. The problem is that water would not have enough time to evaporate if "large" nozzles are used.

Combination of direct and post/pre turbo total of Six nozzle would be the best viable option for best distribution and cooling.