View Single Post
  #8  
Old 01-04-2004, 10:50 PM
boostm3 boostm3 is offline
Junior Member
 
Join Date: Mar 2004
Location: White Plains, NY
Posts: 7
Default

Heres the problem I found this winter. Here, we had frequent bouts with temperatures well below 20 degrees F. When it got down to near 10, I found that even a 45% methanol mixture, while remaining liquid in its reservoir, would ice up within the 4mm nylon lines. It never burst, since I believe most parts of the system remained liquid, but it wasnt thrilling to see the ice in the nylon lines Ill tell you! I just think that in these very small lines, it can be extremely hard to keep things liquid down below 15 or 20 degrees F. At least, with most of the system remaining liquid, overall there were no problems.
__________________
------
Paul E -
'99 White M3; < 69K miles; Dinan SC kit with 6" RMS crank pulley and water/air Aftercooler: 11 psi-367 SAE rwhp/304 ftlbs; Custom Tuning by Nick G; AA Aquamist Water/Methanol Injection and AA exhaust; Fikse FM-10s;
Reply With Quote