Thread: Nozzle Problem
View Single Post
Old 24-11-2011, 04:46 PM
Howerton Engineering Howerton Engineering is offline
manufacture sponsor
Join Date: Feb 2009
Location: Northern California
Posts: 334
Default Re: Nozzle Problem

It would be difficult for the jet to screw itself shut. It is designed to be screwed down to a light-snug fit. All jets come from the factory adjusted this way.

Usually the grooves cut into the side of the brass insert(spinner) get clogged with debris. Make a close inspection of the brass spinner, even one groove clogged will make a significant difference in flow.
Reply With Quote