After a few months of running methanol i decided to pull the intake apart to see what effects the methanol has on the components. My main point of interest was the throttle body flaps.
The throttle body its self was very clean. I have not yet removed the plenim to check that out.
Small traces of salt were found in the throttle body and also on the brass flap ( which i was surprised at )
I am aware that methanol is corrosive to aluminum but have seen no noticeable differance ( no pitting etc ) Only the salts and what you can see in the pic.
The pic also tells me im getting more meth in the rear runner ott
