Thread: Nozzle Problem
View Single Post
  #2  
Old 22-11-2011, 07:44 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Nozzle Problem

The H2 and H3 shares the same cirucit board.

Did you find out what caused the blockage? The recommended procedure on the user manual suggest purging the system until all debris are flushed out of the system before clipping the nozzle in.

Th esystem come with an in-tank filter. Once purged, no need to use a secondary filter inside the jet.
__________________
Richard L
aquamist technical support
Reply With Quote