[T.F.S.]

Interesting, I did wonder if there is a limit to how much I can add pre compressor but I thought if looking to reduce inlet temps the more mix I put through the turbo the better?

Also I have been told by Devils own to double the flow rating on the injectors if using their 250psi pump but I have also been told by a user that this is not true and I should go with the original ratings...if the latter is true it explains a lot because I wouldn't be injecting any more than my last test and TBH I have had very similar results....

Sure I have had a higher inlet temp at 7000rpm but due to a wet road I was unable to test above 5000rpm on the previous test so we cannot compare at over 5000rpm.

The D02 would work out at only 120cc in that case...a very small amount for pre compressor?