Thread
:
Pump is activated after a while when the motor is not running
View Single Post
#
12
24-09-2016, 07:12 AM
okkimi
Junior Member
Join Date: Jun 2011
Location: Finland
Posts: 7
Re: Pump is activated after a while when the motor is not running
Here is the wiring diagram that I sent years ago.
Connect the Aquamist red wire to the pin 8 (green/yellow wire) in orange connector in the engine bay black box where the ECU is.
http://imgur.com/a/JTJWC
This works in european models.
Last edited by okkimi; 24-09-2016 at
07:21 AM
.
okkimi
View Public Profile
Send a private message to okkimi
Find all posts by okkimi