Re: Issues with 2011 Speed 3 control.
Does the 4-bar display ramps up and down during a drive with varied throttle? Is 4-bar the maxmium you ever see at WOT at peak RPM?
The 4-bar display is an arbitrary figure from the DI input channel. I assume you have solder linked the x2.5 option underneath the circuit board or page 21.1 of the user manual.
To bump up this signal, you just need to use the "gain" trimmer. Be careful not to trigger the >95% IDC led or you will cut off the peak flow progression.
__________________
Richard L
aquamist technical support
|