For reference ... my setup is as follows
PJk04 turbos
Giac 3- + 5bar FPR
Darintake
ER's
Aquamist W/M
Piggies
Milltek
***This is not a full stage 3 setup***
Running on 93 octane and power is approx 300whp ...
Ok the question, Where should i set the trip-adj at ????
With my current setup the injectors get buried and actually reach a 140% IDC. I'll link a few charts, if any other charts would help lmk and i'll see if i can procure them from the same run.
thanks!
[/img]