Quote:
|
Originally Posted by Anonymous
Hey Richard, how can I get a solenoid like one of these? I need a reliable solenoid that will withstand an approximate 130psi pressure difference. The only one I've found so far was from coolingmist.com.... but it failed and filled my motor with water as well as my crank case.... that was an $120 mistake...
|
The indicated valve can withstand a steady prssure of 120psi but only suitable for use with methanol or water. The failure of the coolmist valve may be due to pressure spike beyond 130psi. Check if you are feeding your pressurised water into the correct port - it might still be usable.
Richard