View Single Post
  #2  
Old 23-04-2017, 08:53 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: How to verify that the system is opening properly

There is a issue on the flow detection circuit or a clogged nozzle.
"B" denotes the system is trying to trigger but abort after no flow is detected.

If "B" led is not sustaining, turbo boost is limited to wastegate pressure, provided you have wired up the failsafe circuit correctly.

If you have a supercharged engine, the failsafe circuit has to activate a bump valve to vent boost pressure.

All the failsafe options are there, all depends how you use it.
__________________
Richard L
aquamist technical support
Reply With Quote