9 wrap wires.jpg
now sort the main bunch of wiring from the pump to the engine. wrap em up
10 plug wire neatly.jpg
install like so. ground to chassis. cable tie. ready for wrapping later
11 routing.jpg
this is the direction they need to go. past the suspension and above the sub frame. there is a gap on the side. make sure you ie them with a clip to the chassis along the way.
12 routing.jpg
from under the car. look. along the petrol tank.
13 routing.jpg
then over around the tank towards the middle of the car. and finally running parralel with the fuel lines