"What is in the box"
? 6M of 6mm OD nylon hose (806-261). 2M of 4mm OD nylon hose (806-266)
? HFS-4 Electronic controller
? 0.8 mm water jet (806-323) in plastic bag
? 0.9 mm water jet (806-324) in plastic bag
? 1.0 mm water jet (806-325) in plastic bag
? 1x 4mm Tee compression fitting (806-395) in plastic bag (new for 2.12 kit)
? 2x M8 x 1/8 NPT jet adapter with plug (806-357N)
? A set of three restrictors with insertion tool
? 1x water tank adapter 1/8 BSP (806-270), 6mm compression fitting and in-tank filter (806-258)
? 4x M5x40mm bolt, washers and fasteners for pump
? 1x M6 grounding stud with washer and nuts and 6mm eyelet for pump ground.
? 2x 6mm to 1/8 BSP compression fitting for pump..
? 2x 3/8BSP-M to 1/8BSP-F reducer for pump.
? 1x 4mm to 1/8 BSP compression fitting for FAV.
? 1x 6mm to 1/8 BSP compression fitting for FAV.
? Water pump harness. 6M of #12 AWG cable and 6M of multi-core cable with blue harness.
? 1x Fast acting valve with red harness
? 1x turbine flow sensor with yellow harness
? 1x water level switch with connector (806-281c)
? 1x DDS3v12 Gauge with 1.5M x 8-way cable
? 2.0 M of multi-core with grey capped RJ48 for ECU interface, fail-safe and map switching.
? Molex type 4-way power in harness
? Green harness for Direct injection engines (v2.12).
? User manual
Generic wiring diagram:
components in the kit:
Gauge:
Compression fittings (zero leak)
More to come...
More to come...