View Single Post
  #13  
Old 26-10-2014, 11:12 PM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default Re: 2005 Ion Redline build/install

$20 tank a no go, but have a few more lines on other ones. None of the normal places have them (Rock Auto/Ebay) as somehow they believe that the SS/NA and SS/SC have the same tanks. Next weekend I hope to have tint and keyless done, and will have the shop run an injector wire and map wire to the cabin. My only concern now is mounting the FAV. The nozzles will be on the driver's side of the car, but the driver's side has ABS, HID ballasts, ECU, and fuse block as seen in the picture.


My only choice is to mount above the radiator, above the engine, near the ECU/fuse block, or in the bumper area. I am leaning towards the bumper area as it would be closest to the nozzle, and furthest away from the electronics and heat, but most likely to get wet. I can post a pic of the bumper area if anyone would like to see.
Reply With Quote