Quote:
|
Originally Posted by JohnA
so how does it work then? (inj volumes vs boost etc...) :smile:
|
Hi John, just like mention, your web site along with this forum have been a great source of info on clet closely related to the zlet and WI.
This is my first experience with WI, the installation is about half way complete.
The 2d set up as with the 1s kit is boost activated, the FIA 2 module interpret the IDC and inject water at a constant ratio to the fuel. Further adjustments can be made by varing the jet size.
I decided to use two independant set ups, so as to have full control over pressure and boost activation for each jet. Ive heard a lot of people say that they have been limited with two jets and one pump.
Any advice is most welcome :smile: