[Caspergti]

Wow, 18psi, how did you achieve that??!!

Would you sugest I run more meth in the mix then? Say 60/40? I can get the jet to the exit of the I/c no problems so I will do that if you say it makes no difference to the charger if you inject there.

Am I right in my jet size calculation? 380cc injectors which will probably run to about 80% duty, so a 0.4 or 0.5mm jet after the I/c is the right size? 60/40 mix using about 20% mix to fuel.

Will I have enough resolution on the gauge or adjustment on it to get full gauge deflection due to my lower flow rates??

John