[Caspergti]

Well im pretty angry.
Go to start the system for the first time and power up...... Nothing.

Check all my connections, all fine, and correct as the manual states.

Wobble the power receptacle to the controller, and i get buzzing and an array of lights. Had a look at the back of the controller and the solder joints connecting the receptacle to the controller board are all a different colour to the rest, con checked them out and 3/4 of them are cold joints.

Surely if you pay nearly $800 for a full system they would test this first? Im now stuck with half an injection system, and a controller that is about as much use as a chocolate teapot!

Who do i speak with to get a replacement?

John