Thread: HFS3 problem
View Single Post
  #1  
Old 21-03-2010, 06:42 AM
ziad ziad is offline
Member
 
Join Date: Sep 2009
Location: Melb, Australia
Posts: 39
Default HFS3 problem

hello,

i figure i might put it up here incase either jeff or richard see it. anyway after my initial wrong restrictor issue the car was runing very nicely. went for a drive today one word awesome..... except half way there have a problem.

the failsafe light came on. if i turn off the guage its still on. if i turn on from the guage the light is on but nothing else is on.

i have unplugged all connectors to the hfs3 and replugged, power cycled, even checked the fuses on both the hfs3 as well as the pump. check the wiring. but all seems ok. but the unit does not work.

i unplugged the pipe from fav and did a test with the injector jumper and the sys jumper connected the 3 ligts on the board (hfs3) come up but there is no noise from the pump. also put the jumper of inj on the board and nothing there as well. the fuel injector light flashes on the hfs3 but its not working.

i am next going to try and check the power on the pump... and hopefully borrrow another guage and control board to see if it fixes it... but any thoughts to help me along??
Reply With Quote