[Raceready]

I believe the level sensor is operating as it should in my case. I didn't need to unplug it. When the level is low the yellowlight will periodically flash but this may just be due to the water moving in the tank. If it stays on for a while it will shut the gauge down but the light remains on. If I am on a hill I guess it senses water and the gauge will light up. When I get to flat area it will then cycle through the same sequence and eventually shut down.

I set the 'sc' to show 5 bars at full boost (one click clockwise). I've left the wl and wh settings at 12 o'clock as the instructions mentioned that being a good setting. Do I need to scale them?

Thanks for the help