Quote:
Originally Posted by Flr Power
Wow! You are using a lot of water/meth! Probably more than 70% of the fuel injected. Did you try using less water/meth like around 1200cc/min to see if you coud still reach your power goal?
|
So sorry for the delay, I missed this.
Yes! I have been forever upgrading my meth system as we hit it's max flow. I have personally run 5 different flowing jets in my DP setup as I chased more power. The last change was stage 3 cams and 4" downpipe resulting in the need to increase jets again (which is what I am running above). Looking at the logs (and seeing power drop) is very obvious we were running out of jet. upgraded jets solved the problem, we even started them on lower flow rates but had to quickly turn them up to make top end power.
Rob