Thank you Richard. Here is the diagram that the shop who installed the system used.
https://goo.gl/photos/RR3p6rWtMt1Wr6cn6
As you can see its V1 and missing the very important lower section of the diagram compared to what you posted. I did see the HFS4 thread you linked to but I was unsure if it applied exactly to the HFS3 V3.1
The car is throwing a trouble code for the wastegate solenoid being unplugged.
the DR1 jumper was not installed and the prescaler jumpers were incorrectly configured. I went ahead and set those according to your posted diagram.
Please advise