Thread: Jetting size help
View Single Post
  #2  
Old 27-11-2012, 03:54 PM
Richard L Richard L is offline
Manufacturer sponsor
  
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Jetting size help
20% of 3500cc/min of fuel =700cc/min of M50W50 should get you started. a 0.8mm + 0.9mm nozzle with a 0.9mm restrictor is about right. A single 1mm is on the low side.
__________________
Richard L
aquamist technical support
Reply With Quote