Thread: problems with FAV solenoid - no work, but getting very hot! ::fixed::
View Single Post
  #20  
Old 14-06-2012, 12:41 PM
softic softic is offline
Member
  
Join Date: Jul 2011
Location: Moscow, Russia
Posts: 59
Default Re: problems with FAV solenoid - no work, but getting very hot!
Is it okay if I will test all reference points without FAV solenoid connected?
Since it is always under voltage it is getting hot which is not good, I assume - ok?

Also, what to you mean by 'test point 15 internal 5V reference 1' - what is reference 1?
Should I check all voltages and impedance (resistance) vs. 'ground' control point on the mainboard?
__________________
Alexey K.
I drive Peugeot 207 RC 225 bhp with HFS-3 onboard / tuned ECU
Reply With Quote