View Single Post
  #19  
Old 19-01-2012, 08:16 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Aquamist 2d Install ? on an FD?

Quote:
Originally Posted by Tem120 View Post
hah yeah but what i'm asking is the diagram is that the face of the ECU? or the face of the plug from the harness?

also the wire I tapped is most similar to the LG ( light green) on the diagram . LOL itsa solid LG I have pictures of the injector I tapped if I find my camera i'll try and post them but reguardless I've decided to take the wiring from the ECu because it will be much less messy comming form the engine bay I think.. I looked at the engine harness today and the first 4 wires are green , solid green , green with white line , geeen with red line , and green with another line thats on the harness I have an inkling that those are the injector wires . BUT they are in a different location than depicted on your diagram I will upload some pictures

BUT I just wanted to say thanks alot for all the help . and for putting up with my stubborn ness hah . I definitely want one of those summer things .

The drawing is looking at the bare pins of the ECU. No wire harness is involved.
A good picture will be a great help for all. With and with out the harness plugged in.
__________________
Richard L
aquamist technical support
Reply With Quote