View Single Post
  #14  
Old 28-04-2016, 10:27 PM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Talking Re: Nozzle spray angle...

OK... I think I'll go with the in-line (back of the bend) location. Should be
easy enough if I can use these nozzles...



As suggested, I will position the nozzles a little bit towards the incoming
airflow to try and keep as much water off the walls as possible. Having the
tip of the nozzle projecting a few mm should help a little as well.

@ Richard L
I don't see the extended nozzles anywhere on the Aquamist Direct site. Can
you confirm that they are selected the same as standard nozzles ?

Cheers... jondee86
Reply With Quote