Final install pics of my aquamist kit.
2 gallon Tank. It's also mounted to the floor and can be easily moved to access spare tire if needed. Fold the seat and just have to push the tank in.
Outlet of the intercooler drilled and tapped. Second pic shows the jet installed.
Ecu wires. I stripped the old tape more than enough, but gave me lots of room to tap the wires properly.
Once I confirmed all the connections were leak free I installed some protective sleeves over the lines.
Have some pics showing how I routed the main feed line from the trunk to the engine bay using the fuel line route, but will upload them later.