Thread: Mazdaspeed 3
View Single Post
  #75  
Old 07-08-2017, 04:57 PM
Puddin15 Puddin15 is offline
Junior Member
 
Join Date: Aug 2016
Location: Colorado
Posts: 20
Default Re: Mazdaspeed 3

Hi Richard,

Question on the fail-safe. I've noticed on the under range setting the "B" LED will blink when the flow is below the WL setting, and then will stay on once the flow is within the fail-safe window.

However when the "B" LED is blinking, I do not see the two fail-safe activation LED's illuminate. I take it this is normal? If so, what would cause the WL setting to actually trigger both fail-safe activation LED's?
Reply With Quote