View Single Post
  #5  
Old 28-07-2014, 06:24 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: New water tank system

The baffle is a long vertical dividing wall from the top (filler cap) to the bottom. The wall is approximately 3" from the outlet ports face.

The wall where the dimples met is approximately 3mm thick. It is debatable if it can withstand a negative 5G on a full tank (5kgs). How many G's on a 30 mph crash test?

Anyway, we are a bit concern about using just two 6mm bolts of the drilled dimples. We supplied two acetal stand-offs to filled the voids on the dimples, giving extra support. These stand-offs only comes with our purpose made bracket.
__________________
Richard L
aquamist technical support
Reply With Quote