View Single Post
  #53  
Old 16-09-2017, 06:48 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Want to install custom meth plate

Quote:
Originally Posted by Jroyalty7 View Post
Hey Richard,

So setting the piR trimmer fully clockwise gives a little better linear reading it seems like the meter picks up the flow a little better but I still have the SC dial maxed out clockwise, the bar graph maxes out at WOT though. Also I'm probably close to 20 PSI boost right now and don't think I'll ever see over 25psi. Thank you again.
The bargraph should never set to "max out" at WOT, it should only max out around 5-6 bars, otherwise the system cannot recognise a leak or cut hose.

Have you ever read the user manual?
__________________
Richard L
aquamist technical support
Reply With Quote