Yellow RJ45 Connector & 4 way power connector
Yellow RJ45
Diagram in the Manual indicates the Red wire goes to the "ignition sw (injector +)" and in the description it says ignition switched 12v? Can you clarify please?
Should the red and green wires tap off the injector leads; or only the -ve (green) on the injector and the +ve on the acc switched +v 12v supply?
Power Connector
If the purple wire is not used should both the white and black be grounded anyway?
Last edited by stevebez; 27-07-2010 at 01:19 PM.
|