View Single Post
  #82  
Old 23-12-2017, 04:17 AM
jondee86 jondee86 is offline
Member
 
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Talking Re: Nozzle spray angle...

OK. MBT tuning will have to wait until I get the car on a dyno. In the meantime
I will keep tweaking the fuel table to get the AFR while injecting into the low 11's.
Engine is running well with no sign of any hesitation under load. Did a 3rd gear pull
on the highway today and managed 199.6kPa when hitting the rev limiter. Or at
least I thought it was the limiter until I checked my log and found that I hit boost
cut at 197kPa. Didn't realise I had an overboost cut set, so maybe next time I will
manage to struggle past the magic 200kPa mark

Cheers... jondee86
Reply With Quote