Thread: Need help setting up Aquamist to run based on boost alone
View Single Post
  #7  
Old 26-10-2023, 01:40 PM
andysharp andysharp is offline
Member
  
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Need help setting up Aquamist to run based on boost alone
My tuner is the same, prefers to tune with the WMI running from boost signal.

So blue wire from the grey ecu harness conected to the boost signal on ecu.
TRIG jumper on MPS
MODS is PWM
THRES is set to come on around 13psi
GAIN is at 12oclock so linear flow to the max of the boost sensor which is my max boost at 22psi
P/IR fully CCW
Reply With Quote